We currently have 4 version of the Konnected Alarm panel available. The chart below outlines the different features and functions of each board.
Alarm Panel (v1) | INTERFACE (v1) | Alarm Panel (v2) | Pro Board | Interface Expansion | |
Available | On Clearance | On Clearance | Available Now | Coming July 2020 | Available Now |
Installation method | Replaces an existing wired alarm system. Connect sensor wires directly to the Konnected board. | Works in parallel to an existing wired alarm system via jumper wires from each zone to the Konnected board. See our INTERFACE Installation Video | Can completely replace an existing alarm system. Or with Interface expansion can connect to a legacy system. | Can completely replace an existing alarm system. Or with Interface expansion can connect to a legacy system. | Requires a v2 or Pro Board connected to the Expansion slot |
Connection | Wifi | Wifi | Wifi | Wifi or Ethernet | N/A |
Power | 12vDC (2.5A) adapter included | Drawn off Legacy Panel | 12vDC adapter (2A) included | POE or 12vDc Adapter (2.5A included) | N/A |
Lightning protection | Available to purchase | Available to purchase | Built-in | Built-in | N/a |
Arming & disarming | Arm and disarm using your smart home framework. | Arm and disarm your existing alarm system as you normally do using the keypads. If your existing system supports it, you may be able to arm & disarm remotely via the Konnected board using a relay and key switch. | Arm and disarm using your smart home framework. | Arm and disarm using your smart home framework. | |
Keypads | Not compatible with existing keypads. | Keep your existing keypads. | Legacy Keypad not compatible with board take over. Used with Interface legacy keypad remain. | Legacy Keypad not compatible with board take over. Used with Interface legacy keypad remain. | |
Professional Monitoring | Available through Moonlight | Keep your existing pro monitoring service. | Available through Noonlight | Available through Noonlight | Keep your existing. |
Siren Connection | 1 Built-in connection for most 12V alarm system sirens up to 1.4A or 15W | No built-in siren connection. It's possible to control the siren via Konnected using the included relay module. | 1 Built-in connection for most 12V alarm system sirens up to 2A or 24W | 2 Built-in connection for most 12V alarm system sirens up to 2A or 24W |