How do I connect it?
Simply connect your Alarm (or Bell + /-) wires to the Alarm +/- connection on the main board. They are the 2nd and 3rd screws from the left of the main board. (Add-on boards do NOT have an alarm output as most homes only have one siren)
Special Note: On the main board the - connection is to the right side of the BLACK screw connection. Also the + connection is on the center screw (On the sensor connections the G(round) or - is between the numbered connections)
Your alarm will receive a 12DC power when the alarm is activated.
What if my alarm doesn't sound?
- Check that you have wired it correctly. Check to make sure your wires are not reversed.
- Check to make sure it isn't JUST a speaker. Many alarms simply have a speaker and the panel acted as the alarm sounder. If that is the case check out some other easy and affordable options.
Next Step: Wiring your Buzzer/Sounder