Konnected Alarm System with 2 boards sometimes skip motion

Hey!

I have a dual board konnected system, I am using it with Homebridge. However, sometimes 1 or 2 zones are not registering motion, thus the automations not working. 

Furthermore, when I restart Homebridge, often none of the zones work for the first time. I have to restart Homebrige again to make the konnected boards register state changes. The boards have stable connection, I have looked into that already.

I have the following config:

{
            "name": "Konnected",
            "advanced": {
                "discoveryTimeout": 20,
                "entryDelaySettings": {
                    "delay": 120
                },
                "exitDelaySettings": {
                    "delay": 180,
                    "audibleBeeperModes": [
                        "1"
                    ]
                }
            },
            "panels": [
                {
                    "name": "Konnected V1-V2",
                    "uuid": "8f655392-a778-4fee-97b9-482591817b816",
                    "ipAddress": "192.168.1.20",
                    "port": 9554,
                    "blink": true,
                    "zones": [
                        {
                            "enabled": true,
                            "zoneNumber": "1",
                            "zoneType": "motion",
                            "zoneLocation": "Garage",
                            "binarySensorSettings": {
                                "triggerableModes": [
                                    "2",
                                    "1"
                                ]
                            }
                        },
                        {
                            "enabled": true,
                            "zoneNumber": "3",
                            "zoneType": "contact",
                            "zoneLocation": "Border",
                            "binarySensorSettings": {
                                "triggerableModes": [
                                    "2",
                                    "1"
                                ]
                            }
                        },
                        {
                            "enabled": true,
                            "zoneNumber": "4",
                            "zoneType": "motion",
                            "zoneLocation": "1st floor",
                            "binarySensorSettings": {
                                "invert": false,
                                "triggerableModes": [
                                    "1"
                                ]
                            }
                        },
                        {
                            "enabled": true,
                            "zoneNumber": "5",
                            "zoneType": "motion",
                            "zoneLocation": "2nd floor",
                            "binarySensorSettings": {
                                "invert": false,
                                "triggerableModes": [
                                    "1"
                                ]
                            }
                        },
                        {
                            "enabled": true,
                            "zoneNumber": "out",
                            "zoneType": "siren",
                            "zoneLocation": "Alarm"
                        }
                    ]
                },
                {
                    "name": "Konnected V1-V2",
                    "uuid": "8f655392-a778-4fee-97b9-4825918c7d844",
                    "ipAddress": "192.168.1.18",
                    "port": 21097,
                    "blink": true,
                    "zones": [
                        {
                            "enabled": true,
                            "zoneNumber": "1",
                            "zoneType": "beeper",
                            "zoneLocation": "Garage Beeper"
                        },
                        {
                            "enabled": true,
                            "zoneNumber": "3",
                            "zoneType": "beeper",
                            "zoneLocation": "Entryway Beeper"
                        },
                        {
                            "enabled": true,
                            "zoneNumber": "4",
                            "zoneType": "motion",
                            "zoneLocation": "Entryway",
                            "binarySensorSettings": {
                                "triggerableModes": [
                                    "2",
                                    "1"
                                ]
                            }
                        },
                        {
                            "enabled": true,
                            "zoneNumber": "5",
                            "zoneType": "contact",
                            "zoneLocation": "Terace",
                            "binarySensorSettings": {
                                "triggerableModes": [
                                    "2",
                                    "1"
                                ]
                            }
                        },
                        {
                            "enabled": false,
                            "zoneNumber": "6",
                            "zoneType": "contact",
                            "zoneLocation": "Garage",
                            "binarySensorSettings": {
                                "triggerableModes": [
                                    "2",
                                    "1"
                                ]
                            }
                        }
                    ]
                }
            ],
            "platform": "konnected"
        }

 

Any help is appreciated!

  • What are you using for a home hub, and what system is Homebridge running on?
  • I am using a server to run am Ubuntu Server LTS VM and Homebridge is running in a Docker container.
  • And your home hub, what device is that? (Primary)
  • I have an Apple TV 4th gen, the 1080p one. 


    How can I debug this issue? Should I check the connections physically? I have also opened a GitHub issue, should I close it?

  • Hey Peter, can you join me on Discord, I can help debug real-time there.

  • Thanks! Where can I find the Discord channel?

  • The discord invite link is there in the GitHub repo readme or NPM repo readme.
Login or Signup to post a comment