I migrated from SmartThings to Hubitat. I have several Konnected-wired open/closed, motion, and sirens that all work fine via Hubitat except for one open/closed sensor. It tends to get stuck as open after closing the door. Opening then closing the door usually gets it back to closed. I've read suggestions about looking for a resistor in the wiring but the odd thing is that this was never an issue in SmartThings. Could there be a difference in the SmartThings vs Hubitat driver causing this? Anything else I could try?
Update: I removed a resistor which seems to have fixed this. Don’t know why it was never a problem before.